Black Box FX150A - Manual (Page 21)

22
LINESHARE PRO
3.6 Installing the Lineshare Pro
on a KSU or PBX System
A KSU or PBX phone system is
common in a medium or large
office arrangement in which calls
are coming in on two or more lines
and can be routed to any number of
extensions. A KSU or PBX typically
has features like call holding, music
on hold, conference calling, and
intercom paging.
Figure 3-6 shows telephone devices
connected to the Lineshare Pro for
a KSU or PBX phone system. For the
Lineshare Pro to operate properly, it
must be “in front” of the KSU or
PBX. In other words, the Lineshare
Pro must connect directly to the
incoming telephone line (the last
line in rollover).
All equipment on the last line in
rollover (KSU or PBX, fax, computer
modem, and so on) must connect
directly to the Lineshare Pro as
shown in Figure 3-4.
CAUTION
You should be familiar with
telephone wiring to complete
this installation. If you have
any questions or are not
confident that you can
complete this installation
procedure, contact technical
support.
Do not plug the Lineshare
Pro into a KSU or PBX
phone jack. You may
damage your phone system.