Black Box FX150A - Manual (Page 40)

41
LINESHARE PRO
The Answer/Disconnect Cascade
feature is factory preset OFF, 0 4 *.
To turn the Answer/Disconnect
Cascade ON, enter the
programming mode and press the
following on your tone phone:
1 Turn ON
4 Answer/Disconnect Cascade
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
NOTE
See Cascade Port Order in
Section 5.5 for more
information.
[5] Pulse Transfer
Pulse Transfer operates only when
the Lineshare Pro is configured in
the non-secured mode.
The Pulse Transfer feature allows
rotary or pulse-dialing phones that
are connected to the primary default
port of the Lineshare Pro to transfer
calls to other ports. (See Section 3.5)
The Pulse Transfer codes for the
ports are as follows:
PORT 1 - dial 2
PORT 2 - dial 3
PORT 3 - dial 4
PORT 4 - dial 5
The Pulse Transfer is factory
preset ON, 1 5 *.
To turn the Pulse Transfer feature
OFF, enter the programming mode
and press the following on your tone
phone:
0 Turn OFF
5 Pulse Transfer
* End programming sequence (3
beeps indicate correct entry)
(Optional entries for additional
changes)
* Save changes and exit
programming
[6] Open Line Notification (OLN)
Open Line Notification operates
only when the Lineshare Pro is
configured in the non-secured
mode.