Lineshare pro – Black Box FX150A User Manual

Page 49

Advertising
background image

50

LINESHARE PRO

[7][5] Time at Home

The Time at Home function
controls the amount of time that the
Lineshare Pro holds the phone line
open and listens for a routing
command. It is activated when the
Lineshare Pro is in the secured
mode, or when Home Routing is
turned ON and a call is routed
home. When the Time at Home
period expires, the Lineshare Pro
disconnects the call without
rerouting to another port.

NOTE

You must turn ON the Home
Routing feature in order for
this function to activate,
even in the secured mode.

The Time at Home is factory-

preset, 3 0 *, which allows 30
seconds for a routing command to
be entered. The range of this
function can be set between 1 to 60
seconds.

To change the Time at Home to

40 seconds, enter the programming
mode and press the following on
your tone phone:

7 5 Time at Home

4 0 Set time to 40 seconds

* End programming sequence

(3 beeps indicate correct entry)

(Optional entries for additional
changes)

* Save changes and exit

programming

[7][6] Extension Detection Timer

The Extension Detection Timer
operates only when the Lineshare
Pro is configured in the non-secured
mode.

This function controls the amount

of time that the Lineshare Pro allows
an extension phone (not connected
to one its ports) to answer an
incoming call that is ringing the
primary default port.

The Extension Detection Timer is

factory preset, 1 5 *, which allows 15
seconds for a routing command to
be entered. The timer can be set for
from 1 to 30 seconds.

To change the Extension

Detection Timer to 25 seconds,
enter the programming mode and
press the following on your tone
phone:

7 6 Extension Detection Timer

2 5 Set time to 25 seconds

* End programming sequence (3

beeps indicate correct entry)

(Optional entries for additional
changes)

* Save changes and exit

programming

[8] Rings Available to the Ports

The Rings Available to the Ports
feature allows you to define the
number of rings available to each
port. The number of rings available
to the ports range from 0 to 99 rings.
The Rings Available to the Ports are
factory-preset as follows:

Advertising