Electrical connections – Bakers Pride MT-200 User Manual
Page 10
Convection Oven
Installation
8
3. Clean all substances, including glue residue. Do not use abrasive substances.
4. Position the machine so that it is perfectly level and set the height by means of the leveling feet.
Electrical Connections
The oven is setup for operation at the voltage set forth on the technical data plate. All ovens are provided
with a power cord.
The flexible cable for connection to the electrical mains must not have characteristics which are less than
those of a type with rubber insulation mod. H07RN F and it must have a section which corresponds with
that set forth in the section “Technical Data” of the oven. The cable must also be anchored to the frame
with the cable clamp, the screw of which can be reached through a hole in the frame. It must in any case