Introduction, Safety precautions, Safety signs and messages – Bakers Pride MT-200 User Manual
Page 4
Convection Oven
Introduction
2
Introduction
Thank you for purchasing our convection oven. We feel certain that the oven you have purchased will
meet your expectations, and will be a trustworthy assistant in your work for a long time to come, providing
performance of the highest levels. You will also receive efficient and timely after-sales technical and
operational service. Your oven is quick and easy to install. Nonetheless, please CAREFULLY read this
manual, and keep it for future use. We hope you enjoy your work!
PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT. If
you have any questions, please contact your BKI Distributor. If they are unable to
answer your questions, contact the BKI Technical Service Department, toll free:
1-800-927-6887. Outside the U.S., call 1-864-963-3471.
Safety Precautions
Always follow recommended safety precautions listed in this manual. Below is the safety alert symbol.
When you see this symbol on your equipment, be alert to the potential for personal injury or property
damage.
Safety Signs and Messages
The following Safety signs and messages are placed in this manual to provide instructions and identify
specific areas where potential hazards exist and special precautions should be taken. Know and
understand the meaning of these instructions, signs, and messages. Damage to the equipment, death or
serious injury to you or other persons may result if these messages are not followed.
This message indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
This message indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
This message indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury. It may also be used to alert against unsafe
practices.
This message is used when special information, instructions or identification are
required relating to procedures, equipment, tools, capacities and other special
data.