BT PaperJet 60E - Manual (Page 14)

14
9 Automatic print quality test page
Your PaperJet 50 automatically cleans the
print nozzles and prints a test page.
Once printed, the display shows
CHECK PRINT OUT
1 = EXIT 0 = REPEAT
The printed sheet contains the following:
a numbered scale, to check ink flow and
the electrical circuits on the print head.
a set of graphics and text to assess print
quality.
Check the numbered scale for interruptions
and the black areas for horizontal white
lines. If none are present, the print head is
installed correctly and working normally.
Press 1 if the test print is acceptable.
Or
Press 0 to repeat the test.
If there is still a problem after printing three
test pages try:
changing the paper you are using, it may be
too porous.
removing and re-installing the print cartridge.
cleaning the electrical contacts and print
nozzles (see ‘To clean the Cartridge and
nozzles’
, page 56).
replace the Cartridge.
•
•
•
•
•
•
For example to enter the name JOHN:
Press the 5 button until the display shows J .
Press >
Press the 6 button until the display shows O .
Press >
Press the 4 button until the display shows H .
Press >
Press the 6 button until the display shows N .
10 Enter your name and fax number
Your name and number will be added to
every fax page you send. You can enter a
maximum of 16 characters and 20 digits.
Press the Function button until the display
shows
INSTALLATION
Display shows TEL. LINE SET-UP
Press twice. Display shows STATION NAME
Display shows TYPE YOUR NAME
Press the buttons to enter your name up to a
maximum of 16 characters, as shown below
Press buttons to move the cursor to the
character you want or to insert a space.
Press the ✱ and # buttons to enter different
symbols such as ‘&’.
Press the Clear button to delete entries.
A-Z
PaperJet 60e_se 6-06-2003 16:46 Pagina 14