BT PaperJet 60E - Manual (Page 19)

19
If using the 12 hour clock, press the Function
button to switch between a for AM and p for PM .
Press the < > buttons to move the cursor.
NOTE
To cancel your pre-set fax transmission, press
the
Stop button or remove the document from the
document feeder.
If you want to store the document in memory
for delayed faxing, see “To fax from memory” on
page 20.
To send a fax at a pre-set time (delayed
faxing)
You can set your PaperJet 60E to send a fax
at a specific time in order to take advantage
of cheaper call rates or to allow for different
time zones.
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Press until the display shows DELAYED TX
Press the Start button.
Display shows TYPE TIME
HH:MM
Enter the time at which you want your fax
to be sent, e.g. 18.30.
Display shows TYPE FAX NUMBER
Enter the number you want.
Press to confirm. Display shows the time at
which the fax is due to be sent
AUTOMATIC RX
TX AT 18:30
1 2 3
To change the details of a pre-set fax
You can set a new time and fax number.
Press until the display shows DELAYED TX
Display shows ALREADY ENTERED
Display shows CHANGE PARAM?
Either
Press to display CANCEL SETTING
To confirm. The fax is cancelled and your
machine returns to standby.
Or
Display shows TYPE TIME
Enter the new time at which you want your
fax to be sent, e.g. 19.00
Display shows TYPE FAX NUMBER
Press to confirm. Display shows
AUTOMATIC RX
TX AT 19.00
/
/
PaperJet 60e_se 6-06-2003 16:47 Pagina 19