BT PaperJet 60E - Manual (Page 45)

45
To change the silence detection time
Press until the display shows INSTALLATION .
Display shows TEL.LINE SET UP .
Press until the display shows SILENCE
LAPSE: 6 .
Press to set the lapse time to 3 , 4 , 6 , 8 , 10
seconds or NO (off).
Press to confirm the option displayed.
Press to return to standby.
Caller Display
If you have subscribed to your network provider’s
caller display service your PaperJet 60E will display
caller information. When you receive an incoming
call the display will show:
Your caller’s number.
Or
WITHHELD – if your caller has chosen to withhold
their number.
Or
NOT AVAILABLE – if your caller is connected to an
exchange which does not provide this service.
Or
OPERATOR – if you are being called by the operator.
Or
INTERNATIONAL – if you are being called from
overseas.
Or
RING-BACK – if you have previously called an
engaged number and set up a Ring back call.
Or
PAYPHONE – if you are being called by a payphone.
PaperJet 60e_se 6-06-2003 16:52 Pagina 45