BT PaperJet 60E - Manual (Page 40)

To adjust the ringer volume
You can switch between High, Medium,
Low and Off. The default setting is High.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows RING VOLUME:
HIGH
Press to switch between the settings HIGH ,
MEDIUM , LOW and OFF .
Press to confirm the option displayed.
To return to standby.
40
To set the number of rings before your
fax machine takes a call
If the fax machine is set to AUTOMATIC
RX or PHONE FAX RX, it is pre-set to
answer incoming calls after 4 rings.
You can change the number of times it rings
before taking the call
Press until the display shows INSTALLATION
Display shows TEL.LINE SET-UP
Press until the display shows RING COUNT:04
Press to set the number of rings to 01 , 02 ,
04 or 08 .
Press to confirm the option displayed.
To return to standby.
To receive a document longer than the
paper size
If you receive a document sent using a
longer paper size than the one in your fax
machine, you may find the text is cut off.
You can make the fax print the remaining
text on another sheet.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows PRINTER PARAMET .
Press until the display shows SURPLUS: AUTO
Press to select ON from the options of
AUTO, ON and OFF
If you select AUTO , your machine will print
remaining text on another sheet providing
it fills at least 12 mm of the page. By
selecting
ON you ensure that any surplus
text is printed on another page. If you select
OFF , your machine will not print any surplus
text.
Press to confirm.
To return to standby.
PaperJet 60e_se 6-06-2003 16:51 Pagina 40