Black Box ASTCKEY - Manual (Page 14)

Auto-Sync Time Clock
2-4 724-746-5500 | blackbox.com
Figure 2-5. FPR & Mounting Bracket.
8. After the FPR mounting bracket is in its proper position, return the front PCB to
its original position seated in its retaining slot. In this position the top rear of the
PCB will fit close alongside the FPR mounting bracket (see Figure 2-6).
Figure 2-6. Front PCB & FPR Mounting Bracket in Position.
9. Install the two plastic rivets (1 per each side) as illustrated in Figure 2-7 through
the side of the clock frame into the proper locating hole in the FPR mounting
bracket (see Figure 2-5).