Black Box ASTCKEY - Manual (Page 45)

Chapter 4: Operation
724-746-5500 | blackbox.com 4-11
which can be printed on each line (total allowable length = 150 dots or
approximately 21 characters). Also, a maximum of 10 rows can be added.
See Appendix A for a character table which shows character size as a % of
dots for regular and bold characters.
NOTE: Lines cannot be edited. If a mistake is made, press the button and
start over.
9. Enter the desired text in the text field, select Regular or Bold from the dropdown
menu, and click the button. The new message will appear in the
“Message:” display field and the row box on the right (see Figure 4-10). If you
need to correct an error, click the
button to clear the Message display
field.
10.To enter symbols, select the desired symbol from the dropdown menu, select
Regular or Bold from the dropdown menu, and click the button. The
new message will appear in the “Message:” display field and the row box on the
right (see Figure 4-10). If you need to correct an error, click the
button
to clear the Message display field.
NOTE: If you have added a symbol and press the button the Symbol field
will NOT be cleared. Just the Message filed will be cleared.
11.Click the button to retain your print style in the clock for line 1. The
default for line 1 = FINRA settings (see Figure 2-16).
12.If a print style is desired for line 2, click on the “Line 2” tab and a similar screen
will appear to define print for line 2. Follow the same procedure to define Line 2,
and click on the
button to retain print style for line 2 in the clock.
The default for Line 2 is the clock IP/MAC address.
Figure 4-10. Print Lines 1 & 2.
Rows –
each line
= 1 row.
Message
Field
Press
Clear All
to start
over.
Enter Text
Select Symbol