Black Box ASTCKEY - Manual (Page 24)

Auto-Sync Time Clock
2-14 724-746-5500 | blackbox.com
 Carbon Paper: The Auto-Sync Time Clock will print on both carbon and
carbonless paper. The imprint will print through up to six copies, depending on
the quality of the document used. Carbon and carbonless paper deteriorates
over time. Humidity, high temperatures and sunlight accelerate this process. For
maximum print performance, use only high grade, uncontaminated carbon or
carbonless paper.
2.9.3. Adjusting the Print Margin
If you wish to change the default margin adjustment, locate the Margin Selector
on the bottom of the machine and slide in the direction of the arrows to adjust the
print margin (see Figure 2-17).
This selector will move the Paper Sensor forward or backward on the Printer
Platen and determine how much of a margin there is between the imprint and the
edge of the print media. The margin can be adjusted to a maximum of 30 mm
(1.2").
Figure 2-17. Auto-Sync Time Clock Printer Adjustment.
2.9.4. Available Print Methods
There are three different Print Methods available. The default Print Method is for
Paper Detect Only (P.). If you wish to change the default Print Method, locate the
Print Method Selector on the bottom of the machine (see Figure 2-17) and move
it to the desired position.
The settings are: