Black Box ASTCKEY - Manual (Page 44)

Auto-Sync Time Clock
4-10 724-746-5500 | blackbox.com
Figure 4-9. Example of Both Left & Right Printing.
7. For auto numbering select: Print the same number all the time
OR….select
Print number Nth times & increment by 1. You must enter the Nth number
if using this selection (default value = 1).
The Auto-Sync Time Clock will automatically add a sequential number to the
printout.
The Nth #: field selection will make the automatic number increment or remain
constant. For example, if a value of “1” is entered, the number will increment by
one after each print. If a value greater than “1” is entered, the Auto-Sync Time
Clock will print the same number that many times before incrementing to the
next number. For example, if a value of “3” is entered the same number will be
printed three (3) times consecutively, then the number will increment by one for
the next three (3) printouts, and so on.
NOTE: For OATS compliance this numbering should not be used on line 1.
8. Click on the Print Lines 1 & 2 link under Print, and the Print Lines 1 & 2
screen will appear (see Figure 4-10).
NOTE: For OATS compliance, custom print styles and symbols should not be used
on line 1. However, depending on the specific application, it may be
necessary to identify each location where a Auto-Sync Time Clock resides.
For example, a location code may be required to precede the date and time
stamp. Other applications may require a floor number, department number,
job number, workstation code, bank teller number, trader code, branch
name or any other unique identifier. You can create up to two custom print
lines using a similar procedure. There is a maximum number of characters