Bell'O 8160 - Manual (Page 15)

Step 3: Mounting the TV
English
TILT KNOB
PAN KNOBS
Y
If your audio, video, and power cables will not be accessible after you mount the TV, you
need to make those connections now. Before doing this, however, make sure all TV and
component power cords are not plugged into any electrical outlets and your audio and
video equipment is turned off. Make sure you leave enough slack so you can install the
mount without any interference.
Figure 11
Getting the mount ready for attaching your TV
Tighten the “tilt” and “pan” knobs in the straight position using the supplied Allen Key Tool (Y) as
shown in Figure 11. This step makes your mount stable and easy to assemble.
Don’t forget those wires!