Bell'O 8160 - Manual (Page 16)

English
Figure 12
EA
MP
Mounting the TV
When you’re ready to put the Monitor
Plate (MP) onto the Extension Arm (EA),
get a friend or an assistant to help you lift
the TV and guide the monitor plate onto
the extension arm as shown in Figure 12.
After you’re confident that the TV with
the Monitor Plate (MP) is properly seated
into the Extension Arm (EA), you need to
tighten the Security Screws (SS) using a
Phillips-head screwdriver as shown in
Figure 13. Because your TV is already
attached to the extension arm, you need to
work from above and behind the monitor to
do this.
(View from Rear of TV)
Figure 13
SS
EA
After the TV is
installed, carefully try
to lift it off to make
sure it is secure.
If it has been correctly
installed, the TV
should not move.