Bell'O 8160 - Manual (Page 9)

Step 2: Securing the Monitor Plate Holder
Finding a wood stud to mount to
Using a stud finder, determine the exact location of the stud to which you want to attach the wall
mount. Using an electronic stud finder works best because it gives you an indication of where the right
and left sides of the stud are. After you determine the stud location, mark the right and left side of the
stud as shown in Figure 4. These markings help you determine the center location of the stud for proper
drilling. Line up the Installation Template (IT) with your pencil markings and tape it into place.
Wood Stud
Figure 4
English