Bell'O 8160 - Manual (Page 3)

English
NEVER exceed the maximum load capacity of:
TV Wall Mount 8160: 65 lbs (30 kg) TV Wall Mount 8165: 50 lbs (23 kg)
Precautions!
• This mounting bracket was designed to be installed and utilized ONLY as specified
in this manual. Bell’O International Corporation will not be responsible for failure
to assemble as directed or for the improper assembly, use, or handling of this
product.
• Improper installation of this product may cause damage or serious injury.
Bell'O International Corporation cannot be liable for direct or indirect damage or
injury caused by incorrect mounting, incorrect use, or incorrect assembly.
• If the mounting bracket will be attached to any structure other than those
specified in this manual, only a licensed professional contractor/installer should
perform this installation. The supporting structure must support, at minimum, four
times the combined weight of the mounting bracket and TV. It is the responsibility
and liability of the installer to ensure the suitability of the supporting structure.
• This product should NEVER be mounted to metal framing studs.
• Check carefully to ensure that there are no missing or damaged parts.
Never use defective parts. If any parts are damaged or missing, call Bell'O
International Corporation at 888-779-7781 and parts will be shipped directly to
purchaser. Please contact Bell’O International Corp. before attempting to return
products to the point of purchase.
• Specifications are subject to change without notice.
• The maximum weight of your television cannot exceed the maximum weight rating of
your mount or any attached Bell'O ® UL listed adapters sold separately, whichever is
lower.