Brother HL 2700CN - Manual (Page 129)

5 - 24 ROUTINE MAINTENANCE
4
Clean the transfer roller unit and the transfer roller guide with a dry soft cloth to prevent paper jams.
Figure 5-38
5
Clean the exit roller. This will help to prevent paper jams at the paper exit and dirt from appearing
on your printouts.
Figure 5-39
6
Close the back cover.
■
Be careful you do not break the actuator while cleaning the registration roller and paper pick-up
roller.
■
Make sure you do not put too much pressure on the registration roller and paper pick-up roller.
This could damage them and cause poor print quality.
Figure 5-36 Figure 5-37