Brother HL 2700CN - Manual (Page 97)

4 - 9 OPTIONS
7
Pull out the 2 green sleeves covering the screws as far as they will come. Turn the green sleeves
to tighten the screws of the duplex unit to the printer. Once the screws are fully tight, push the green
sleeves back in.
Figure 4-18
8
Put the hook on the left hand side of the duplex unit into the hole of the printer. Secure the screw of
the duplex unit to the printer.
Figure 4-19
9
Connect the connector cable to the printer.
Figure 4-20
10
Plug the printer into the AC power outlet/socket and turn on the printer power switch.