Brother HL 2700CN - Manual (Page 71)

3 - 14 CONTROL PANEL
HP LASERJET FONT NO. =I0000:#####
FONT PITCH =###.##
SYMBOL SET PC-8/...
Sets the symbol set or the character set.
TABLE PRINT Print code table.
AUTO LF =OFF/ON
ON: CR
→CR+LF, OFF: CR→CR
AUTO CR =OFF/ON
ON: LF
→LF+CR, FF+CR, or VT→VT+CR
OFF: LF →LF, FF→FF, or VT→VT
AUTO WRAP =OFF/ON
Selects whether a line feed and carriage return
will happen when the printer reaches the right
margin.
AUTO SKIP =ON/OFF
Selects whether a line feed and carriage return
will happen when the printer position reaches
the bottom margin.
LEFT MARGIN =####
Sets the left margin at column 0 to 126 columns
at 10 cpi.
RIGHT MARGIN =####
Sets the right margin at column 10 to 136
columns at 10 cpi.
TOP MARGIN =####
Sets the top margin at a distance from the top
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0"
The factory setting is 0.5
BOTTOM MARGIN =####
Sets the bottom margin at a distance from the
bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5
or 2.0"
The factory setting is 0.33(None-HP), 0.5(HP)
LINES =####
Sets the number of lines on each page from 5 to
128 lines.
PRINT MENU (Continued)
Display Shows Description