Hale AutoFill-E Tank Refill Control System - Manual (Page 2)

NOTICE !
Hale Products, Inc. (Hale) cannot assume responsibility for product failure result-
ing from improper maintenance or operation. Hale is responsible only to the limits
stated in the product warranty. Product specifications contained in this manual are
subject to change without notice.
All Hale products are quality components -- ruggedly designed, accurately
machined, precision inspected, carefully assembled and thoroughly tested. In
order to maintain the high quality of your unit, and to keep it in a ready condition, it
is important to follow the instructions on care and operation. Proper use and good
preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER
IN YOUR CORRESPONDENCE.
ECO NO REV CHANGE FROM BY DATE APVD
HALE PRODUCTS, INC.
A Unit of IDEX Corporation
Conshohocken, PA 19428 USA
0023 A Initial Release LwH 01/31/2005 MAL
252 B Separate Power Feed LwH 11/07/2005 MAL
DRAWN BY LwH ISSUE DATE COPYRIGHT ©
NOT TO BE REPRODUCED OR USED TO
MAKE OTHER DRAWINGS OR MACHINERY.
CHECKED BY PRW 11/07/2005
Manual p/n: 029-0020-81-0, Rev. -B
Printed in U.S.A. © Hale Products, Inc. 2005
All Rights Reserved