Hale AutoFill-E Tank Refill Control System - Manual (Page 35)

Intelli-Tank Manual (106759) 021502 – 3 – Class 1
When the unit is first powered up the LEDs will cycle on individually starting with
the EMPTY (bottom) LED and then the LEDs will show current status.
•
A Master unit properly connected to a functioning transducer will display
current tank level information.
•
A Master unit not connected to a pressure transducer will alternately flash the
bottom two LEDs.
•
A Remote unit connected to a Master unit (through the 1-wire data line) will
mimic the Master unit’s LED condition and flash rate.
•
A Remote unit not connected to a Master unit will alternately flash the upper
two LEDs and the lower two LEDs. This indicates a “no data” condition.
Level indications: