BNC 835-3 User Manual - Manual (Page 27)

Frequency Sweep Submenu
After accessing the Frequency Sweep menu, first of three displays allows to enter the
start and stop frequency by using the
→ ← keys to select the digits and using the
rotary knob to increase and decrease their values. Use the ↓ ↑ arrow to move
between the several displays that contain settable sweep parameters. On the second
display, the number of points, and the on and off time can be entered. On the third
screen, select the sweep mode between LINear, LOGarithmic, and RANDom. Also
select the repetition mode between INFinite, and 1 (single repetition).
Start the sweep by pressing the RF On/Off button . The submenus can always
been exited (without starting the sweep) by pressing the menu key .
Number of Points per Sweep
On (dwell) time
Off time
Sweep Mode Repetition
ALC on/off
Figure 18 Displays shown for the frequency sweep configuration
27