BNC 835-3 User Manual - Manual (Page 30)

Important note: All sweeps must be started with the RF on/off button on (green
light illuminated), otherwise no signal will be output during the sweep.
Modulation Submenu
After accessing the Modulation menu, use the ↓ ↑ arrow keys to select the desired
submenu entry. Press the menu key to enter the selected submenu. Choose EXIT
to return to the main menu.
Pulse
Modulation
Amplitude
Modulation
Frequency
Modulation
Figure 21 Modulation submenu.
Pulse Mod Submenu
In the Pulse Mod submenu the pulse modulation can be accessed. Use the ↓ ↑
arrow keys to move the cursor to the parameter that you want to change. Use the
→ ← and rotary knob to modify the parameters.
On line 1, select between INT (internal pulse generator) and EXT (external input).
30