AEM 30-2500 AQ-1 Data Logging System - Manual (Page 12)

Page 12 10-2500 AQ1 Instructions RevD 102512.doc
BATTERY VOLTAGE
The Battery Voltage page is shown below in Figure 15. The battery voltage is
measured on the red switched ignition wire (SWIGN). See the section on “Power
Connections” for wiring information.
ACCELEROMETER
The Accelerometer page is used for calibrating the accelerometer. After mounting the
AQ1 Data Logger module, the accelerometer must be calibrated in order to display
accurate data. Click on the Choose and Calibrate button in the Accelerometer Mounting
Position section. Follow the on-screen instructions to calibrate the accelerometer. The
Accelerometer page is shown below in Figure 16.
Figure 14. Digital 1 Page with Inverted Input
Figure 15. Battery Voltage Page