AEM 30-2500 AQ-1 Data Logging System - Manual (Page 15)

Page 15 10-2500 AQ1 Instructions RevD 102512.doc
LOG FILES
Log files are automatically stored on the SD card with an
“.AQ1” file extension. Before
viewing the data, the
“.AQ1” files must be downloaded to your hard drive where they are
saved as “.DAQ” files for viewing in AEMdata. The files will be automatically
downloaded when you connect to your device with the AQ-1 software as shown in
Figure 20.
The Log Files page is used for converting and downloading .LOG files from the SD
card. To convert and open a .LOG file, select a file and click the open button. See
Figure 20 below.
Selecting the ‘Delete logs from AQ-1’ checkbox will result in the files being deleted from
the AQ-
1’s SD card after they are safely downloaded and saved to your hard drive. If
multiple logs have been downloaded, the last one will be opened in AEMdata provided
that option is checked; if only a single log is downloaded then that file will be opened.
Figure 21. Log Download Options
Figure 20. Download File Window