AEM 30-2500 AQ-1 Data Logging System - Manual (Page 7)

Page 7 10-2500 AQ1 Instructions RevD 102512.doc
USING THE AQ1 DATA LOGGER
INSTALLING THE SOFTWARE
The latest version of the AQ1 Data Acquisition Software can be downloaded from the
downloads section of the AEM Performance Electronics forum at
www.aemelectronics.com/downloads. Download the AQ1 Data Logger software and
run the installer. A copy of AEMdata analysis software is included with the AQ1 Data
Logger software for viewing and analysis of log files.
USING THE SOFTWARE
Double click on the AQ1 Data Acquisition software icon and open the AQ1 Data Logger
software. The icon for the AQ1 Data Acquisition software is shown below in Figure 7.
OPEN AND SAVE CONFIGURATION FILES
AQ1 Data Logger configuration files have a .loggercfg suffix and contain the settings
and sensor calibrations of the AQ1 Data Logger. Configurations are opened and saved
using the AQ-1 drop down menu. See Figure 8 below.
Figure 6. AQ1 On-Board (Left) and Harness (Right) USB Ports
Figure 7. AQ1 Data Acquisition Software Icon