AEM 30-3703 Infinity-8/10/12 Mini-Harness - Manual (Page 8)

AEM Infinity Harness Manuals 8
© 2014 AEM Performance Electronics
Flying lead bundle
Wires are ink stamped with descriptions as follows:
BATT GND Connect directly to battery negative
BATT PWR Connect directly to battery positive
Sensor GND Connect to low reference (GND) of 5V analog sensors
SWT PWR Ignition switch input.
5V REF Connect to high reference (5V PWR) of 5V analog sensors
ACC PWR Option for powering accessory relays
INJ PWR Fused 12V power for injectors
IGN PWR Fused 12V power for coils
Completing the harness
Use the supplied Molex MX64 terminals to add circuits and features as needed. Refer
to the Infinity-6/8h pinout for available options. Refer to the example schematic included
below for recommended wiring designs.