AEM 30-3703 Infinity-8/10/12 Mini-Harness - Manual (Page 10)

AEM Infinity Harness Manuals 10
© 2014 AEM Performance Electronics
expose it to temperatures above 85° Celsius (160F).
In cases where the Infinity is to be used in place of the stock ECU, the location
that the stock ECU occupied is suitable.
On applications where the ECU is to be located in a different position than stock,
the interior of the vehicle is best.
The Infinity should be located in a place that reduces the length of extension wires
from the PDC while maintaining an environmentally sound location.
The ECU location must permit the PDC to be mounted in a serviceable location.
Power Distribution Center
PDCs included in the harness assemblies generally include all relays and fuses
necessary for proper function and should be mounted in a location which permits
serviceability. Ideally the PDC should be located in the passenger compartment, or if
necessary within the engine compartment as far away from heat sources as can be
achieved. Some PDCs contain flying lead bundles which must be wired to the battery,
fuel pump and radiator fan(s), switched ignition and possibly other interfaces. Routing of
this flying lead bundle should also be taken into account when determining the mounting
location of the PDC.