Overview, Models, Downloadable files – AEM Infinity Supported Applications - Dodge 2008-2010 Viper 4G User Manual
Page 2: Adapter harness options
2
© 2014 AEM Performance Electronics
OVERVIEW
The AEM Infinity EMS can be adapted to most fuel injected engines. When possible, AEM will provide
“base cal” sessions and configuration files for supported applications that have been verified by AEM
engineers. These session and configuration files are starting points only and will need to be modified for
your specific application. This manual lists the files available and suggested changes for your engine. It
also includes a pinout with suggestions for adapting the Infinity ECU to your engine harness. It is the
responsibility of the installer to verify this information before starting the engine.
MODELS
Dodge
2008–2010 Viper with 8.4L V10 engine
DOWNLOADABLE FILES
Files can be downloaded from
. An experienced tuner must be available to configure
and manipulate the data before driving can commence. The Quick Start Guide and Full Manual describe
the steps for logging in and registering at
These documents are available for
download in the Support section of the AEM Electronics website:
ADAPTER HARNESS OPTIONS
30-3701 Plug & Pin Kit
This kit includes mating connectors and terminals for the Infinity. It also includes a main relay kit which
is necessary for proper power distribution. This kit is best suited for experienced installers who want to
build their own harness.
30-3702 Harness with Flying Leads
This harness includes a fused power distribution center with main relay. Pre-terminated connectors are
available for the internal UEGO sensors and AEMNet. A bag of multi-color flying leads is included to
simplify custom harness builds.
30-3703 Mini Harness with Pins
This harness includes a fused power distribution center with main relay. Pre-terminated connectors are
available for the internal UEGO sensors and AEMNet. 100 pins and 30 sealing plugs are included.
30-3600 02 Sensor Extension Harness
Extension harness to connect AEM UEGO Wideband 02 sensor to 6-pin Deutsch DTM in Infinity Mini
Harnesses (30-3702/3703).
30-3601 IP67 Comms Cable
USB Mini-B comms cable; 39” long with right angled connector and bayonet style lock.
30-3602 IP67 Logging Cable
USB A-to-A extension cable: 39” long with right angled connector and bayonet style lock.
30-2981 ECU Patch/Extension Harness
Extension harness to connect the factory wiring harness to the factory PCB.