AEM Infinity Supported Applications - Dodge 2008-2010 Viper 4G User Manual
Page 18
18
© 2014 AEM Performance Electronics
Infinity
Pin
Hardware Reference
08–10 Dodge
Viper Function
08–10
Dodge
Viper Pin
Destination
Hardware Specification
Notes
C2-33
Analog_In_20
Spare Analog
Input
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out pins
as power supply and Sensor Ground
pins as the low ref erence. Do not
connect signals ref erenced to +12V as
this can permanently damage the
ECU.
C2-34
Analog_In_21
3 Step Enable
Switch / TPS2A
C2-24
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out pins
as power supply and Sensor Ground
pins as the low ref erence. Do not
connect signals ref erenced to +12V as
this can permanently damage the ECU.
See 3StepSwitch 1-axis table f or setup.
C2-35
Analog_In_22
USB Logging
Activ ate
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out pins
as power supply and Sensor Ground
pins as the low ref erence. Do not
connect signals ref erenced to +12V as
this can permanently damage the ECU.
See USBLoggingRequestIn channel f or
input state. See Setup Wizard page
USB Logging f or conf iguration options.
C2-36
Analog_In_23
Charge Out
Pressure /
TPS2B
C2-22
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out pins
as power supply and Sensor Ground
pins as the low ref erence. Do not
connect signals ref erenced to +12V as
this can permanently damage the ECU.
See ChargeOutPress [kPa] channel f or
input state. See Setup Wizard page
Charge Out Pressure f or calibration
options.
C2-37
Digital_In_6
Spare Digital
Input
No pullup. Will work with
TTL signals.
Input can be assigned to dif f erent pins.
See Setup Wizard page Input Function
Assignments f or input mapping options.
C2-38
Digital_In_7
Clutch Switch /
Brake Switch
C4-34
No pullup. Will work with
TTL signals.
See ClutchSwitch 1-axis table f or setup
options. Input can be assigned to
dif f erent pins. See Setup Wizard page
Input Function Assignments f or input
mapping options.
C2-39
Power Ground
Ground
C2-27
Power Ground
Connect directly to battery ground.
C2-40
Power Ground
Ground
C2-28
Power Ground
Connect directly to battery ground.
C2-41
CanH_Bout
CANH
Dedicated High Speed CAN
Transceiv er
Not used
C2-42
CanL_Bout
CANL
Dedicated High Speed CAN
Transceiv er
Not used