Infinity supported application 13 – AEM Infinity Supported Applications - Honda H-Series Engine User Manual

Page 13

Advertising
background image

Infinity Supported Application

13

© 2014 AEM Performance Electronics

Infinity

Pin

Hardware Reference

7100-XXXX-62
7101-XXXX-63

Function

Dest.

Pin

Honda
OBD 1

Dest.

Pin

Honda

OBD

2a

Dest.

Pin

Honda

OBD

2b

Hardware

Specification

Notes

C2-19

Analog_In_14

Traction Control

Mode / Sensitiv ity

12 bit A/D, 100K
pullup to 5V

0–5V analog signal. Use +5V
Out pins as power supply
and Sensor Ground pins as
the low ref erence. Do not
connect signals ref erenced
to +12V as this can
permanently damage the
ECU. See the
TC_SlipTrgtTrim [MPH] 1-axis
table. A multi-position rotary
switch such as AEM P/N 30-
2056 is recommended.

C2-20

Analog_In_15

Exhaust Back

Pressure

12 bit A/D, 100K
pullup to 5V

0–5V analog signal. Use +5V
Out pins as power supply
and Sensor Ground pins as
the low ref erence. Do not
connect signals ref erenced
to +12V as this can
permanently damage the
ECU. See Setup Wizard
Exhaust Pressure page f or
setup options. See EBPress
[kPa] f or channel data.

C2-21

Analog_In_16

DBW1_TPSB [%]

12 bit A/D, 100K
pullup to 5V

0–5V analog signal. Use +5V
Out pins as power supply
and Sensor Ground pins as
the low ref erence. Do not
connect signals ref erenced
to +12V as this can
permanently damage the
ECU.

C2-22

+5V_Out_2

+5V Out

Regulated,
f used +5V
supply f or
sensor power

Analog sensor power

C2-23

+5V_Out_2

+5V Out

Regulated,
f used +5V
supply f or
sensor power

Analog sensor power

C2-24

+5V_Out_2

+5V Out

Regulated,
f used +5V
supply f or
sensor power

Analog sensor power

C2-25

VR+_In_5

Driv en Right Wheel

Speed Sensor +

Dif f erential
Variable
Reluctance Zero
Cross Detection

See Driv en Wheel Speed
Calibration in the Setup
Wizard Input Function
Assignment page.

C2-26

VR-_In_5

Driv en Right Wheel

Speed Sensor -

C2-27

VR-_In_4

Non Driv en Right

Wheel Speed

Sensor -

Dif f erential
Variable
Reluctance Zero
Cross Detection

See Non Driv en Wheel
Speed Calibration in the
Setup Wizard Input Function
Assignment page.

C2-28

V R+_In_4

Non Driv en Right

Wheel Speed

Sensor +

Advertising