Lukas AHP2-1 - Manual (Page 13)

13
COD. 193553057 - v.1 - UPD 080703
GENERAL PRECAUTIONS
This manual contains important safety information: read carefully before installing and using the pump.
This manual must always accompany both the pump and the machine on which the pump is installed, even when
pump and machine or the pump alone is sold, loaned or otherwise transferred to other premises.
Before installing the pump and setting it up for operation make sure it has not been damaged during transportation:
check that there are no cracks or dents on the body and that there are no traces of oil leaks. If damage is noticed,
inform the carrier of the problem immediately. DO NOT INSTALL THE PUMP. Ask the manufacturer for instructions.
The manufacturer shall not be held liable for injury to people or animals or
damage to property caused by installation and operation of a damaged pump.
1 - TRANSPORT, STORAGE AND UNPACKING
Given the modest weight of the pump, no particular transport precautions are necessary.
Is the pump set aside to be used some time after purchasing, it must be stored in a place adequately protected
against weather conditions at a temperature between 10° and 50° C.
Do not stack more than four single boxes containing pumps. If the pumps are delivered packed on pallets, they should
be left in their original packing and unpacked immediately prior to use.
Dispose of packing materials in accordance with the laws of the country where the pump is unpacked.