Blaupunkt Dallas RMD 169 - Manual (Page 18)

18
Calling up stored stations
You can call up stored stations at the touch
of a button.
FM
Call up the stations directly on the selected
memory level as follows:
•
Press the keys ST1 - ST6.
To call up stations on a different memory
level:
•
Press NEXT until the desired memory
level is displayed, then select a stored
station with ST1 - ST6.
AM, AMT
You can call up the stations on the selected
frequency band directly:
•
Press the keys ST1 - ST6.
Calling up stations on the other frequency
band:
•
Press NEXT: the other frequency band
is displayed. Then select the stored
stations using ST1 -ST6.
Sampling stored stations with
Preset Scan
You can sample stored stations briefly on
all frequency bands and on the selected FM
memory level.
Preset Scan can be started only when PTY
is disabled (“PTY” is not lit on the display).
If necessary, deactivate PTY on menu level
2. Proceed as follows:
•
Press TU and disable PTY using the
PTY key.
Starting Preset Scan:
•
Press SCA for approx. 1 second.
All stored stations on the frequency band
which can be received are sampled briefly
in turn. “SCAN” and the flashing station
name/frequency appear alternately on the
display.
Selecting sampled stations/terminating
Preset Scan:
•
Press SCA or one of the rocker keys
briefly.
Note:
Should you store a station which has already
been stored, the corresponding station key
and the memory level flash briefly if a differ-
ent memory level is called up.
Automatically saving the stron-
gest station with Travelstore
You can store the six strongest FM and AM
stations in the current reception region au-
tomatically in the order of field strength. This
function is particularly useful on long jour-
neys. Proceed as follows:
• Press TU: menu level 2 is displayed.
• Press TS briefly.
“T-STORE” flashes on the display.
The six strongest FM stations are automat-
ically stored on the “T” (Travelstore) memo-
ry level. If fewer than six stations can be
received, four lines appear through the
memory locations which are not occupied.
When the procedure has been completed,
the strongest station (ST 1) is selected.
Stations can also be stored manually on the
Travelstore level if required (see “Storing
stations”).
Radio operation with RDS (Radio Data System)