Blaupunkt Dallas RMD 169 - Manual (Page 8)

8
Further functions of the rocker:
Further settings available with
AUD
8
DSC-MODE
7
PTY
The settings are available only if the
corresponding function is activated.
7 DSC (Direct Software Control)
You can adjust programmable default
settings using DSC.
Further information: “Programming
with DSC”.
8
AUD
For adjusting the treble, bass, balance
(left/right), fader (front/rear) and loud-
ness settings.
Loudness = adjustment of the low-
volume sounds to the human ear.
Different treble, bass and loudness
settings can be stored for the FM, AM,
MD and AUX modes.
Adjustment procedure:
Select mode.
Press AUD once: “BASS” and the se-
lected value appear on the display.
Select from the options using << / >>.
Use / to change the settings.
The values selected are shown on the
display. The last setting selected is
stored automatically.
Particular feature of loudness:
The values can be selected between
LOUD 6 and LOUD OFF by means of
the rocker / .
Leaving AUD:
Press EXIT.
If no change is made within eight sec-
onds, AUD is automatically switched
off.
MiniDisc and CD changer mode
CDC mode
Select CD
>>
Up: Press briefly.
<< Down: Press briefly.
Select track
Up: Press briefly.
CUE - fast forward (audible):
Keep depressed
Down: Press twice or more in quick
succession
Replay track from beginning:
Press briefly
REVIEW - fast rewind (audible):
Keep depressed
MD mode
Select track
/ >> Up: Press briefly
CUE - fast forward (audible):
Keep depressed
/ << Down: Press twice or more in quick
succession
Replay track from beginning:
Press briefly
REVIEW - fast rewind (audible):
Keep depressed
Condensed instructions