ADS-TEC VMT5012 (2010) - Manual (Page 22)

Terminals VMT5012
22
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.2 S OFT KEYBOARD
If the operating system is installed ex works, the soft keyboard is included in this
installation. If the device is delivered without any operating system, the soft keyboard has
to be installed by the customer. By using the soft keyboard, data can be entered via the
touchscreen like with an external keyboard.
H
OW TO OPERATE THE SOFT KEYBOARD FROM VERSION 3.11:
Activate and deactivate the soft keyboard for letter/character input using
the touchscreen
Switches display of numeric keypad on/off (only if numeric keypad is
displayed)
Switching between representation modes (alphanumeric keypad 
numeric keypad  bar of function keys)
Soft keyboard representation, zoom in
Soft keyboard representation, zoom out
Note:
If a function is to be activated, which requires pressing two keys at the same time (e.g.
Alt + F4); these keys have to be pushed one after another at the soft keyboard, and the
special keys Shift, Alt and Ctrl must always be pushed first.
Due to differences in programming of a large variety of software, we cannot ensure that
the soft keyboard works properly with all software.
When deactivating the soft keyboard, the previously active state (alphanumeric / numeric
keys or function keys) will be stored and will be displayed when re-activating the
keyboard.
Pos: 22 /Datentechnik/Bedienung/Touch Screen/Touch Screen für OPC / VMT-Serie / OTC 5006 / CPC 5006 / PLC 500 / STC 5015 Multitest @ 0\mod_1158911350731_681.doc @ 825 @