ADS-TEC VMT5012 (2010) - Manual (Page 31)

Terminals VMT5012
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
31
7 D
RIVES
7.1 H ARD DRIVES / COMPACT FLASH DRIVES (IDE INTERFACE )
The storage medium is selected according to the customer requirements. The following
options are available for storage:
Compact Flash memory:
Compact flash memories with a storage capacity of at least 64 MB are
used. The capacity depends on the desired operating system and the
additional programmes to be installed.
Hard disk: A 2.5" hard disk with at least 20 GB (UDMA) is used. On delivery, the
hard disk is formatted in NTFS format (default for Windows XP).
Note:
Recommendation for selection of storage media with a basic installation:
Compact Flash memory: Windows CE.5.0 / Windows XP embedded
Hard disk: Windows XP Professional
7.2 E XTERNAL DRIVES
By default, no drive for removable media (CD/floppy disk) is integrated in the device.
Additionally the system provides an USB interface, with which an external drive could be
connected. In this case, you'd have to ensure that the equipment used is suitable for use
in an industrial environment.
Warning:
Connecting or disconnecting of external drives during operation is inadmissible, since it
cannot be excluded that the drive is in use at this point in time. Data loss might occur if
not observed!
Pos: 35 /Datentechnik/Software / Treiber Installation/Installation des Betriebssystems/Installation des Bertiebssystems für/IPC 11/CPC/PLC/OTC/ VMT-Serie/OPC -Serie @ 0\mod_1159173231142_681.doc @ 926 @