ADS-TEC VMT5012 (2010) - Manual (Page 33)

Terminals VMT5012
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
33
8.2 T OUCHSCREEN DRIVER INSTALLATION
Note:
When installing the drivers, you have to consider that the touchscreen is connected with
the serial interface!
Touchscreen and PS2 mouse can be used simultaneously
Installation must be carried out as described below:
• Switch on PC and boot
• Start the installer file in the touchscreen folder by accessing the service CD with
the Windows Explorer.
• Follow the instructions on screen and agree to the licensing conditions.
• Once the installer is finished, shut down the computer and restart it.
• After restarting the touchscreen must be calibrated. If the driver does not start
automatically, open the setup menu by using the "Start => Settings =>
Control panel => Elo Touchscreen" directory path.
• Start the touchscreen calibration by using the "Calibration data" item, and push
the crosses, which appear one after another on the screen. If the cursor position
coincides with the touch point of your finger on the touchscreen, exit the control
box by using the "OK" button.
Pos: 37 /Datentechnik/Software / Treiber Installation/Softkeyboard/Softkeytastatur für alle Gerät ohne internes Laufwerk(CD/DVD) @ 0\mod_1159175310134_681.doc @ 933 @
8.3 S OFT KEYBOARD
The soft keyboard must be installed from the enclosed CD-ROM in order to enable using
the 5 keys (exception: VMT-series, there are 6 keys) underneath the screen. Installation
must be carried out as described below:
• Connect the external drive with the device.
• Switch the PC on, and insert the driver CD into the drive after booting.
• Start the installer from the service CD.
• Follow the on-screen instructions, install the driver, select the language and
confirm that the computer is going to be restarted.
Note:
Further settings can be performed with respect to the basic settings of the soft keyboard.
You'll find information about this in the Readme file in the installation folder for the soft
keyboard!
8.4 I GNITION K EY L OCKING
Hinweis:
The function Ignition can be controlled with the software tool Ignition Key Locking.
The Tool and the associated documentation can be taken from the Service-CD.
Pos: 38 /Datentechnik/Technische Daten/VMT-Serie/VMT 50xx-Serie/Technische Daten für VMT 5012 @ 0\mod_1160397162515_681.doc @ 1239 @