ADS-TEC VMT5012 (2010) - Manual (Page 25)

Terminals VMT5012
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
25
6.3 USB CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection. The interface
complies with the USB 2.0 standard.
PIN NUMBER SIGNAL NAME
1 VDC
2 D -
3 D+
4 GND
Note:
The USB interfaces may be locked using the Lock USB software tool.
You'll find this software and the documentation on the service CD.
USB
CONNECTION ON THE FRONT PANEL
One USB interface can be accessed from the front. This interface is located under a plastic
cover beneath the display. The cover has a tab on the right-hand side, which is used for
opening. The plastic cover must properly be replaced and carefully closed after using the
USB interface, since otherwise the protection class of IP65 is no longer ensured.