ADS-TEC VMT5012 (2010) - Manual (Page 9)

Terminals VMT5012
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
9
1.5 S TANDARDS
This unit is compliant with the provisions and safety objectives of the following EU
Directives:
• This unit is compliant with the CE mark testing specification limits as defined in the
European test standards EN 61000-6-4 und EN 61000-6-2
• This unit is compliant to the DIN EN 60950 (VDE0805, IEC950) testing
specification limits on “Safety of Information Technology Equipment”
• This unit is compliant to the DIN EN 60068-2-6 (sinusoidal vibration) testing
specification limits
• This unit is compliant to the DIN EN 60068-2-27 (shock and bump) testing
specification limits
Note:
A corresponding declaration of conformity is available for competent authorities, care of
the Manufacturer. Said declaration can be viewed at all times upon request.
For full compliance to the legal requirements in force on electromagnetic compatibility, all
components and cables used for unit connection must also be compliant with said
regulations. It is therefore necessary to employ BUS and LAN cables featuring screened
plug connectors, to be strictly installed as per the instructions contained in the User
Manual.
Pos: 9 /Datentechnik/Allgemeine Hinweise/Ausstattungsvarianten/Ausstattungsvarianten für IPC/5300/5500 /VMT-Serie @ 0\mod_1158760700338_681.doc @ 712 @
1.6 E QUIPMENT VERSIONS
The system is available in two equipment versions:
Platform for use with compact flash memories:
Platform without any rotating mass storage media (hard disks, etc.) including embedded
operating systems (Windows CE.net / XP embedded) for stationary use in connection with
standard Ethernet or radio network cards on portable commissioning and/or forklift
equipment.
Platform including hard disks:
Including hard disks for stationary use, e.g. in manufacturing using standard operating
systems.
Pos: 10 /Datentechnik/Allgemeine Hinweise/Lieferumfang/Lieferumfang für VMT- Serie @ 0\mod_1158824011759_681.doc @ 718 @