AIM Sports Scopes User Manual
Page 14
13
30
NOTE: The side parallax adjustment knob is not to be used to
focus the target image. If the reticle is first focused and the
parallax is properly set, the image should be clear.
THE FINAL STEP: THREE-SHOT GROUPS
Whichever bore-sighting method you’ve used, the next steps
are the same on the firing range. To ensure reliable results
always fire from a rested position when performing these steps.
(If you are using an adjustable objective or side focus model
scope, perform any correction for parallax before continuing, as
explained in “Understanding Parallax” on pages 27-31.)
1. Fire a shot or two.
2. If you are several inches off center, make an appropriate
amount of adjustment to move the reticle to the center of the
target.
3. Carefully fire a three-shot group
4. Use the center of that group as a reference point for the final
adjustments to windage and elevation.
To adjust the parallax distance, turn the focus ring.