Product or warranty service, Aim product service – AIM Sports Scopes User Manual
Page 5
39
4
INSTALLING THE BASE, RINGS, AND SCOPE
Please refer to the instructions included with the base and rings
for their proper installation on the firearm.
If necessary, it is safe to position the rear mount ring directly
on the exposed threaded area near the eyepiece, but only after
focusing the eyepiece. This allows a more forward placement
of the scope.
NOTE: The windage and elevation adjustments on new
AIM scopes are centered as part of the assembly process.
If you are mounting a scope that was previously
mounted on another rifle, you should center the adjustments
(please see “Centering Windage and Elevation Adjustments”)
NOTE: Use care in mounting the Pistol/Scout riflescopes.
It is necessary to place the back edge of the rearmost ring at
least 3/4” forward of the ocular bell/tube juncture to avoid
possible reticle damage. Because of the longer eye relief of
this product, mounting the scope back slightly will not in any
way impair its function or effectiveness.
Product or Warranty Service
AIM Product Service
If your AIM scope fails to perform in any way, you may return it
directly to the factory for replacement.
CONTACT OUR CUSTOMER SERVICE DEPARTMENT:
Toll Free 1-855-ASK-4AIM
1-855-275-4246
CONTACT OUR CUSTOMER SERVICE DEPARTMENT VIA
THE INTERNET:
www.aimsportsinc.com