AIM Sports Scopes - Manual (Page 22)

21 22
CENTERING WINDAGE AND ELEVATION ADJUSTMENTS
TO ACHIEVE OPTIMUM ADJUSTMENT TRAVEL
Making windage and elevation adjustments moves the entire
erector system horizontally and vertically inside the scope. If
the erector system is off to one side – as a result of having been
mounted on a non-adjustable mount – the adjustments won’t
provide equal travel in all directions. To regain full balanced
travel, you must recenter the adjustment as follows:
1. Turn the windage adjustment to the point that it stops moving.
2. Counting the clicks or hash marks, turn it all the way in the
other direction.
3. Turn the dial back half the amount of clicks or hash marks
counted.
4. Repeat this process for the elevation adjustment.
To reposition the dials on Target and Tactical models:
1. Loosen the set screws that surround the top of the knob until
the cylinder turn freely.
2. Move the cylinder dial by hand to align the zero with the white
perpendicular mark at the base of the cylinder.
3. Tighten the set screws until the cylinder is secure.
Target-style dials can be adjusted to the new zero position by
loosening the set screws, rotating the dial, and tightening the set
screws.