AIM Sports Scopes - Manual (Page 21)

23 20
To reposition the dials on scopes:
1. Unscrew the adjustment cover until it “pops up,” fully revealing
the adjustment indication markings and set screws.
2. Loosen the set screws that surround the top of the dial portion.
3. Move the cylinder dial by hand to align the zero.
4. Secure the set screws.
What You Should Know
About Variable Power Scope
AIM variable power scopes allow you to select from a range of
magnifications to suit your particular rifle, cartridge, and shooting
needs.
Warning: Do not loosen the screw in the power selector ring.
Doing so will release the internal gas that keeps the scope fog
free. Loosening the screw will also disconnect a pin that con
trols the internal operations, causing other problems that
would require factory repairs. Do not lubricate the power
selector ring; doing so is unnecessary.
All variable power scopes have a power selector ring in front
of the eyepiece assembly. Turn the ring to align the number
indicating the desired magnification with the indicator on the
body scope.