AIM Sports Scopes - Manual (Page 4)

3 40
PLEASE READ THIS ENTIRE HANDBOOK
BEFORE MOUNTING YOUR SCOPE
How to Install the Scope
THE LOWER THE SCOPE, THE BETTER
A scope mounted close to the rifle ensures proper cheek weld
on the stock for a stable firing position and allows for rapid target
acquisition. We recommend using the lowest possible ring
height. No specific clearance is required, but the scope must
clear the bolt handle, hammer (on lever actions and handguns),
sights, and barrel.
When installed, be sure that your scope does not interfere with
firearm operation, and does not make contact with anything
except for the mount rings.
CAUTION
Always check and be certain that the firearm is unloaded
before undertaking any work upon it.
Mil-dot Reticle
The Mil-dot Reticle is designed specifically to enhance a
shooter’s long range accuracy and ranging capabilities under a
variety of field conditions.