AIM Sports Scopes User Manual
Page 7
37
6
AIM Riflescopes are engineered to provide a generous 3” to 5”
eye relief, depending on the model and the magnification level.
WARNING
If a scope is mounted to far to the rear, the eyepiece can
injure the shooter’s brow. Shooting at an uphill angle also
increases this hazard because it shortens the distance
between the brow and the rear of the scope. For this reason,
AIM scopes are engineered to provide generous eye relief.
Therefore, when mounting your scope, we recommend
positioning it as far forward in the mounts as possible to take
full advantage of this generous eye relief.
SEALS
AIM scopes are sealed from within by several methods, includ-
ing O-rings. All seals are permanent and require no mainte-
nance.
SCOPE EXTERIOR
AIM scopes are made of rugged 6061-T6 aircraft aluminum al-
loy. No maintenance of any kind is required; simply wipe off any
dirt or fingerprints that accumulate with a clean, dry cloth.
POWER SELECTOR RING (ON VARIABLE POWER SCOPE)
No Lubrication is ever required on the power selector ring. Do
NOT LOOSEN OR REMOVE THE HEX-HEAD SCREW IN THE
POWER SELECTOR RING.
ADJUSTABLE OBJECTIVE/SIDE PARALLAX DIAL
No lubrication is required.