AiM SmartyCam ver 1.22 - Manual (Page 20)

SmartyCam
User Manual
Release 1.22 – firmware version 1.03.10
20
www.smartycam.com
6.4.2 – “SETTINGS” option
As anticipated, clicking “SETTINGS” several options appear:
LANGUAGE
Chooses the desired language. In case of erroneous setting of
Japanese language it is very simple to come back because
“SETTINGS” and “LANGUAGE” labels are shown in red.
TIME SETTING
Chooses the time and date format, the time zone and enables or
disables daylight saving time. Default setting is Greenwich Time.
CONF LOAD Allows to load three configuration files (paragraph 6.4.2.1).
OVERLAY
Selects a pre-defined overlay configuration among a list
previously transmitted through SmartyManager. Each
configuration is identified by the name associated through the
software.
INFO
Shows information concerning the camera and its software and
firmware: it is made up of numerous pages mainly used by AIM
staff.
VIDEO SET
Sets some Video options useful to maximize lightness and
recording quality in case of: SmartyCam use on vehicle roof or
onboard (choosing the spot light settings), zoom or not.
VIDEO FORMAT
Chooses the format of the video created with SmartyCam
between .AVI and .MOV.
AUDIO SET
Sets the internal microphone and adds and sets an external one
if connected.
ACCEL CALIBR
Calibrates the 3D accelerometer: samples acceleration and
tunes SmartyCam frame (paragraph 6.4.2.2.)
REC STRATEGY
Allows to start/stop recording automatically or manually: it is
useful to make SmartyCam start (or pause) recording
automatically when fixed parameters are passed/not reached.
AUTO POWEROFF
Enables/disables automatic power-off of the camera after a fixed
period of inactivity (paragraph 6.2)
TRACKS
Loads the track when SmartyCam overlay includes one and the
user has loaded some tracks. Available management options
are: “AUTO” (automatic) or “MANUAL”. At very first start up
setting is “MANUAL” (paragraph 6.4.2.3).
6.4.2.1 – “CONF LOAD” option
Allows to load three configuration files.
• FILE NAME: customizes the prefix to be used to name the files generated with
SmartyCam according to SmartyManager settings;