AiM SmartyCam ver 1.22 - Manual (Page 8)

SmartyCam
User Manual
Release 1.22 – firmware version 1.03.10
8
www.smartycam.com
1.1.1 – SmartyCam part numbers
As shown here below, SmartyCam part number is made up of 11 alphanumeric types, 7 of
which already settled.
Here follows explanation of how o determine the four remaining types.
CAN or power cable selection:
To use the on board camera in standalone mode a power cable is needed. All
cables are available in 2 or 4 meters length: generally the short one is
recommended for bikes and karts while the 4 meters one for cars.
To use the camera with Bridge or logger a CAN cable and not a power cable is
needed.
Available options are:
1 – Power cable 2m long
2 – Power cable 4m long
3 – CAN cable 2m long
4 – CAN cable 4m long
GPS cable length selection:
Available options are:
1 – GPS cable 2m long
2 – GPS cable 4m long
Lens type selection:
Two lens types are available: with 67° horizontal field of view (HFOV) or a wider
one, with 84°(HFOV). The 84° lens is recommended for kart, bike, formula car
and open roof car in general. The 67° lens is the best choice for closed roof cars
(i.e. touring cars).
Available options are:
S – 67° lens
W – 84° lens
Optional microphone selection:
If no additional microphone is needed, input 0. If an additional microphone is
needed choose the cable chosen above (step 1):
1. with a jack (to connect a microphone of your choice), or alternatively
2. with a microphone (supplied by AIM) already jointed to the cable
Available options are:
0 – No additional microphone
1 – Power cable or CAN cable with Jack for external microphone
2 – Power cable or CAN cable with external microphone.