AiM GSX-R 1000 - Manual (Page 10)

MXL P&P SUZUKI GSX-R K3
User Manual
Release 1.07
www.aim-sportline.com
The remaining three plastic pins are on
the bottom part of the bike.
To correctly remove them refer to
Figures 6 and 7.
Figure 5: Right and left fairings junction – pins position.
Insert a tip in the central hole of the pin
and press until you hear a click. This
way the pin is released.
Figure 6 : release the central clip of the plastic pin.
Once the pin released it is possible to
remove it. Use a flat screwdriver: insert
under the pin and rotate it.
All the three pins have to be removed.
When all hex screws and pins are
removed the right lateral fairing is
released.
Figure 7: removal of the plastic pin
10