AiM GSX-R 1000 - Manual (Page 8)

MXL P&P SUZUKI GSX-R K3
User Manual
Release 1.07
www.aim-sportline.com 8
2
2 – Plug & Play kits installation
Suzuki GSX-R K3 Plug and Play kits have been expressly designed to be real plug and
play systems.
WARNING: these kits have been developed and tested to guarantee maximum
compatibility with the stock bike sold by the manufacturer.
The anchor plugs mounted on the back of the logger allows the user to replace the stock
dash in an easy and quick way with no need of cutting, bending or punching anything:
each component is “Plug and Play”.
The logger needs to be connected to the bike high beam using the bracket that comes with
the kit. The bracket is in black anodized aluminium, lightweight and mechanically resistant.
GENERAL NOTES – Read carefully these instruction before installing the kit.
• Do not cut any cable: the wiring supplied with the kit is Plug & Play.
• Be careful not to damage the stock connectors while plugging/unplugging them; in
the following pages is described how to correctly manage them.
• Do not install the system when the engine is hot: stock connectors are quite near
to the engine and there is burning danger.
• The space under the fuel tank is quite reduced: be careful plugging/unplugging
the connectors.
• Be careful not to lose screws and washers.
• Be careful not to damage the fairings while installing/uninstalling them.